Netgear Nighthawk App Wifi Router App Latest Version Download

Netgear Nighthawk App lets you easily monitor and control your home WiFi from anywhere. You can even setup Amazon Alexa and Google Assistant voice commands
4.5/5 Votes: 856,941
2 Days Ago
78 MB
Android 5.0 and up
Get it on
Google Play

Report this app


The is very easy to access and you can download it quickly from the Apple App Store or Google Play Store. Firstly Netgear Nighthawk app comes with upgraded features like remote management and this new feature gives you convenient control and monitors your NETGEAR home network from anywhere in just a few steps. Netgear nighthawk setup is also possible from the app. By login into the Netgear Nighthawk Login page, you can access all the features. Resetting the Netgear router is not possible from the app. To Reset Netgear Router, you need to login on to your computer or laptop.

Nighthawk App

Netgear Nighthawk Login Page For Netgear Nighthawk Router Dashboard

Install, monitor, access, and control your Netgear Home Wi-Fi Network.

In conclusion, you can use most of the features from the dashboard of the Netgear Nighthawk app such as enabling Armor Security, sharing Guest Wi-Fi Guest Network, speed test, pausing Wi-Fi connection, and many more.


Netgear nighthawk setup- With the help of this App, install your router in a few steps.
Secondly, download on IOS and Android – You can download on both IOS and Android devices.

  1. Traffic Meter – You can easily monitor Internet usage from the dashboard.
  2. Pause Internet Access – Pause internet access of your home network on particular devices.
  3. Smart Parental Control – Parents can easily filter content and set limits on internet usage for every device in the home.
  4. Remote Management – Now it is very easy to monitor and control your Netgear home network from anywhere with the help of the Remote Management Feature.
  5. Update Firmware – Check the update to the latest version of the Nighthawk Wi-Fi router.
  6. Speed test – You can check the internet speed of your network with an in-built Ookla speed test.
  7. Set up Guest Wi-Fi Network – Create, configure and share Guest Wi-Fi Network.
  8. Device List – View the list of all connected devices on your home network. with compatibility.


After Netgear nighthawk setup, now you can change the basic settings of your nighthawk router. In this article, you will find the simple steps to change the Network name (Wi-Fi) and Network Security Key (Wi-Fi password) of your Netgear Nighthawk using the Netgear Nighthawk app with the help of this app, you can easily change network settings within a few minutes. You can download this app on your I-pad, tablets, and smartphones. You can also change the basic settings of your router by login into the Netgear nighthawk login page that is

Follow the steps to change the Network name (Wi-Fi) and Network Security Key (Wi-Fi password) of your Netgear

  • Firstly open the app on your device. ( If you don’t have an app, please download it from the app store or from
  • Secondly, on the dashboard, tap on Wi-Fi settings.
  • Now you can see the details of your Wi-Fi network.
  • Thirdly, select the Wi-Fi network that you want to change.
  • After that, enter the new Network Name and Wi-Fi password.
  • Finally, tap Save to complete the process.

Want to create a MyNETGEAR account using the Netgear Nighthawk app and

Create MyNetgear app after Netgear nighthawk setup. By creating a MyNETGEAR account by using the Netgear Nighthawk app, you can access and manage home network settings remotely from anywhere. is the default URL for the Netgear nighthawk login page.

MyNETGEAR account also allows you to register your Netgear product. For instance, to create a Netgear account, all you need is a valid email id. If you already have a MyNetgear account and want to register your router, please go to this article link – How to Register a Netgear router using the app?

To create a MyNETGEAR account using App

  1. From download the Nighthawk app on your device.
  2. Open the app. Create MyNetgear Account – Tap on create MyNETGEAR Account.
    Now enter your First Name and Last Name.
  3. Type in and confirm your Email address and Password. Please note that these emails and passwords are your
  4. My Netgear nighthawk login credentials.
  5. In conclusion, to Verify your account please open your email and verify the account. Netgear is now created. CIRCLE

Register a NETGEAR router using the Nighthawk app?

To register your NETGEAR router after Netgear nighthawk setup using the Netgear Nighthawk app, your device must be connected to the Netgear router itself.

  1. Connect device – Your device should be connected to the Netgear router home network.
  2. Open the Nighthawk app on your device.
  3. Type in your Netgear nighthawk login credentials.
  4. Tap on the login button.
  5. Now you can see the app dashboard.
  6. On the top left, select Menu.
  7. Tap Router Settings under the Settings option.
  8. Tap Register Product.
  9. Register your product pop will display on your device screen.
  10. Sign in to your Netgear account to complete the router registration.



In this article, you will see step-by-step instructions to update the latest firmware on your NETGEAR router using the app. You can download download the Netgear Nighthawk app on both android and ios devices. Once the Netgear nighthawk setup is completed, it is very important to check the update of the Netgear firmware. Resetting the Netgear router in between the firmware may cause permanent damage to your router.

Regular firmware updates improve overall performance, fix bugs, and also update security features. It is recommended to always use the latest firmware version on your Netgear router. Before starting the firmware update, please make sure that your device is connected to the Netgear router’s network.

Important Tips

Do not reset the Netgear router in between the update process and do not close the app on your smartphone while updating the firmware.

To update your Netgear router’s firmware.

  1. Launch the Netgear Nighthawk app on your device that is connected to the Netgear router’s network.
  2. Netgear nighthawk login screen prompted. Enter the Username and Password and click on the Sign-in button.
  3. The Nighthawk app dashboard appeared. Tap on the router image.
  4. Click on Router settings.
  5. Tap on check for updates to check the new version of the firmware.
  6. If you see the new firmware version available, then click on the update. Please note that if no new version is available, that means your router has the latest version.
  7. The firmware update process starts. This process can take a few minutes, do not go online during the process
  8. and leave the router and device until it finishes.
  9. The new version of Firmware is now updated on your Netgear router.


This article provides you with basic step-by-step instructions on how to complete the Netgear nighthawk setup through Netgear Nighthawk App. With the help of this app, now you can easily install, view, and manage your Netgear router’s Wi-Fi network. With the help of this app, you can set your router within a few minutes by using any smartphone or any compatible device.

From the dashboard of the Netgear Nighthawk app, you can complete tasks such as managing parental control, firmware updating, internet speed check, creating & configure a Guest Wi-Fi network and you can also disable internet access to a specific device. Please note that some features of the Nighthawk Wi-Fi router are not available on the Netgear app, to access all the features, you need to login into the web browser of your router.

To log in to the web browser of your Nighthawk Wi-Fi router, please follow the steps that are mentioned at the end of this article. The Netgear nighthawk login dashboard is very easy to use and you can download it quickly from the Apple App Store or Google Play Store.

The remote management feature of this app helps you to access and manage your NETGEAR Wi-Fi network from anywhere. This Netgear router installation process can take a few minutes to complete. Please read the below-mentioned important tips before starting the installation.

Important Tips

  1. Do not Turn off or Reset the Netgear router in between the process.
  2. Do not close the app on your smartphone while setting up the router.
  3. Make sure that your smartphone is updated and compatible with the Netgear Nighthawk app.

The Nighthawk supports these Netgear router models on which you can get the app and some of the troubleshooting issues with respect to the router.

  • Netgear Nighthawk Setup
  • Netgear nighthawk login
  • AC2600 Netgear App Download
  • Netgear Nighthawk AC1950 Login
  • Netgear Nighthawk AC1900
  • Router Netgear Nighthawk X10 Setup
  • Netgear Nighthawk X6 Login Password
  • R6020 Netgear Nighthawk Setup
  • R6700v3 Netgear Nighthawk admin password
  • R7900P Netgear Nighthawk Tri-band Route
  • Netgear Nighthawk R7000
  • R6900 NighthawkApp Login
  • R7960P Netgear nighthawk login
  • Trying to reset the Netgear router
  • with mobile app
  • R6850 Nighthawk App for Mobile device
  • Netgear Nighthawk Pro Gaming XR500 Login
  • R6700v2 Can’t access from Netgear Nighthawk App
  • R7450 Netgear Nighthawk Router login
  • R6400v2 Router
  • R6400 Netgear Nighthawk Setup
  • R6350 Change Netgear Nighthawk admin password
  • R9000 Netgear Nighthawk Best Router 2020
  • R6220 Netgear Nighthawk Affordable Router
  • Change WiFi Password in Netgear Nighthawk R6120
  • Not able to access Netgear nighthawk login page
  • Netgear Nighthawk AC2600
  • R7800 Netgear Nighthawk Firmware Update
  • R7000 Can’t Access Nighthawk App


  1. Plugin Netgear router power adapter into the wall jack. Connect your router to the modem through a yellow-colored Ethernet cable. Make sure to connect the Ethernet cable to the right yellow Internet port of the Netgear router.
  2. Power on the router and wait until the LED lights turn white. download on your device. Open the Nighthawk App on your device once it is downloaded. Tap on New System Setup and then tap on Next to proceed.
  3. On your device, go to the Wireless settings and join the Wireless network of your Netgear router. You can locate the default Netgear Wi-Fi Network Name and Network Security Key ( Wi-Fi) on stickers printed at the bottom side of the router.
  4. After joining the router’s network, return to the App on your device. Once the router network is detected by the Nighthawk app, now you can see a display showing the new network detected.
  5. Netgear router is now connected to the internet. Tap on Next to create a new Wi-Fi network (SSID) and Network Security Key (Wi-Fi password).
  6. Tap Next to set up Security questions. Please note that these security questions will be used to recover the admin password.
  7. Now the NETGEAR router setup is complete, click on Finish to complete the process. On the Netgear Nighthawk app dashboard, you can see the router information. You can also check the status of your router on the Netgear nighthawk login page. If you still have any questions on this topic, please share with us and we will surely answer your questions.

In case you are not able to complete the Netgear Nighthawk setup successfully, please follow the below troubleshooting steps.

  • Re-install the Netgear Nighthawk App on your smartphone.
  • Unplug your router from the power source and plugin back after 15 seconds, now you need to follow the setup process again.
  • Make sure that the router is properly connected to the modem box.

To access more features of your Wi-Fi router, use the webpage of your Netgear Nighthawk Stream Wi-Fi router. Follow these three steps to log in to the web page of your router.

  • Launch a browser on your internet-connected devices such as Google Chrome, Safari, or Internet Explorer.
  • For Netgear Nighthawk router Login, type or into the web address bar and press enter.
  • A small Netgear nighthawk login prompt opens on your screen to enter the username and admin password to log in to the router.


A factory reset helps you to delete all personalized settings of your Netgear router, which means it will delete all the existing settings such as user name, password, WiFi network name (SSID), and other Wi-Fi security settings. A factory reset is necessary whenever you cannot recover the login password. There are two ways to reset your Netgear router. One is through the Netgear Nighthawk router Login page ( or or you can reset through the reset button on your Netgear router.

If you enable the password recovery feature, it is easy to recover your admin password after performing a few steps.

Important note – Do not reset your Netgear router if it is not very important. A wrong reset can damage the router software.

Step 1 – Reset Netgear router via router reset button

  • Make sure your Netgear router’s Power light is on.
  • Look at the back of your router, and locate the Restore Factory Settings or Reset button.
  • Press the reset button using a paper clip.
  • Release the button, So that it goes to Restore Factory Settings or Reset.
  • The router will start rebooting. Wait for a few minutes.
  • Your router resets.
  • To check the status of the latest of your router, visit Netgear Nighthawk router Login.

Step 2 – Reset Netgear router via Netgear login page

  • Do not press any button on your in-between the reset process.
  • All the wireless devices will be disconnected for a few minutes.
  • In some cases, you may need to connect all your wireless devices again.
  1. Go to the web web browser and open a new tab.
  2. For Netgear Nighthawk router Login, type or, and press enter to access the Netgear router login page.
  3. The router login page displays on your screen.
  4. On the Netgear login page, please type admin as username and type password in the password field. Both username and password are in lowercase.
  5. Now you will use the Netgear Nighthawk router Login dashboard.
  6. Go to Advanced>Router information.
  7. Click on the Reboot button.
  8. Now, wait for a few minutes.
  9. The reset Netgear Router task is now completed.


To access the Netgear Nighthawk router Login, we recommend you to use only a desktop or laptop that is connected to the nighthawk router. By logging into your Netgear Nighthawk router Login page through, you can view or change all the current settings of your Netgear router such as a view or change the WiFi password, change the admin password, reset the Netgear router, set up parental control, add Guest network and many more. Before beginning the Netgear router login process, make sure your device is connected to the router’s network.

Tips and Notes:

  • Use only a LAN-connected device to log in.
  • or is the default URL for Netgear login.
  • Do not use a smartphone or tablet.
  • Clear the web browser cache.
  • is the default IP address for Netgear login.
  • Please confirm that you have an active internet connection from the Internet service provider.

Basic steps to access the Netgear router login page

  • Power on your Netgear router.
  • Open any website to check if you have an active internet connection from the modem.
  • Now type or into the web address bar.

Note – If URL does not provide you with the right Netgear router login page, then please enter the default IP Address,press enter.

  • Netgear nighthawk login page displays.
  • Type “admin” as username and “password” as a password.
  • Hit the login button to get the Netgear router dashboard.

Access to the Netgear router login page task is now completed. If you still can’t access the Netgear Nighthawk router Login page, then please try the below troubleshooting steps.

  • Try with a different browser.
  • Power off the Netgear router for five minutes and turn it on again.
  • Make sure that both ends of the Ethernet cable are properly inserted into the Ethernet ports.
    Use any other web browser.


It is very important to change the Network password (Wi-Fi password) of your router to secure your router from unauthorized usage. You can easily change it by logging into the web-based management page of your NETGEAR Smart Wi-Fi Router. By visiting Netgear Nighthawk router Login, you can manage all the wireless settings of your Nighthawk router. Please follow the basic steps to complete this task and this process takes 4 to 5 minutes.


  • To change the Wi-Fi password, your device must be connected to the Netgear router network.
  • Once the new settings take effect, all the previously connected devices will be disconnected.
  • It is advisable to use only a wired device to complete this process successfully.

Basic steps to change the Network password (Wi-Fi password) of your NETGEAR Nighthawk router.

  • Log in to your router web management page by typing or into the web address bar. In case the browser does not show you the login page, try to open it with
  • Enter the Username and Password. The default username is admin and the password is the password. Do not type the Wi-Fi password in the password required field.
  • You will see the Basic Homepage of your NETGEAR Wi-Fi Router.
  • Select a Wireless option from the left side menu bar.
  • Now you can see all the Wireless information of your routers such as Network name (SSID) and wireless password (Wi-Fi)
  • Enter the new Wi-Fi password next to the Password (Network Key) field.
  • Click the Apply button to save the new settings.

Leave a Reply

Your email address will not be published. Required fields are marked *